< < Return to Previous Page
Blue Sea SafetyHub 100 Sigorta Bloğu - 7725-BSS/Fuses Holders için
Blue Sea SafetyHub 100 Sigorta Bloğu - 7725-BSS/Fuses Holders için
Blue Sea SafetyHub 100 Sigorta Bloğu - 7725-BSS/Fuses Holders için

Blue Sea SafetyHub 100 Fuse Block - 7725-BSS

Price : €158,00  + VAT
Incl. VAT : ₺10.665,76
Price in TL : ₺8.888,13(₺1.777,63 + VAT)
:
Add to Wishlist
Add to My Wishlist
Compare
Notify me when the price goes down
Notify me when it is in stock
Recommend
Write a comment

Blue Sea Systems SafetyHub 100 Fuse Block - 7725

The Blue Sea Systems SafetyHub 100 is an ignition-protected, IP66 sealed fuse block that combines up to 7 fused circuits in one compact unit. It holds three MIDI®/AMI® fuses (30–200 A) for high-current loads such as panel feeds, windlasses and stereo amplifiers, and four ATO®/ATC® blade fuses (1–20 A) for low-current loads such as bilge pumps, alarms and clock memory.

It acts as a distribution point for a single heavy input cable from the battery or battery switch, reducing the number of connections on board. The low-current outputs leave through an integrated trailer-style connector plug with 12" leads, giving a secure, waterproof connection without loose wires. Being ignition protected, it is safe for gasoline-powered boats and meets USCG and ABYC requirements. Fuses are sold separately.

Key Features

  • 7 circuits in one unit
  • 3× MIDI®/AMI® fuses, 30–200 A
  • 4× ATO®/ATC® fuses, 1–20 A
  • Integrated waterproof connector plug
  • IP66 sealed cover
  • Ignition protected, safe for gasoline boats
  • Write-on circuit identification label

Applications

  • Main DC distribution from battery or battery switch
  • Panel feeds, windlasses and amplifiers
  • Bilge pumps, alarms and clock memory
  • Engine rooms and exposed locations

In the Box

  • SafetyHub 100 Fuse Block with Cover
  • Integrated connector plug with 12" leads
  • Write-on circuit identification label

Technical Specifications

General Value
Part No. 7725
Circuits 7 (3× MIDI®/AMI®, 4× ATO®/ATC®)
MIDI®/AMI® Fuse Range 30–200 A (max. 170 A per circuit)
ATO®/ATC® Fuse Range 1–20 A (max. 50 A combined)
Max. Voltage 32 V DC
Max. Total Current 280 A (with 4/0 input cable)
Stud Size M8 (5/16")
Stud Torque 20.34 Nm (180 in-lb)
Protection IP66, ignition protected
Standards SAE J1171, ISO 8846, CE
Dimensions Approx. 146 × 99 × 56 mm

Installation & Wiring

Blue Sea Systems 7725 SafetyHub 100 installation instructions and wiring diagram
  • Mounting: Install in an accessible, dry location as close as possible to the battery, ideally vertically. Do not mount directly above vented lead-acid batteries.
  • Unswitched use: Connect the positive battery terminal directly to the input stud for circuits that must stay powered (e.g. bilge pumps at moorage).
  • Switched use: Connect the battery switch output to the input stud for trailer or dry storage boats.
  • Input stud torque: 20.3 Nm (15 ft-lb).
  • AMI®/MIDI® circuits: Connect high-amp loads such as engine starting, distribution panel or windlass to the numbered high-amp studs.
  • ATO®/ATC® circuits: Connect low-amp loads such as bilge pump, VHF radio, clock memory or alarm through the included wire harness and connector plug.
  • Engine starting: Starting circuits do not require fusing; if left unfused, use the Blue Sea 7732 Engine Circuit Link Bus instead of an AMI®/MIDI® fuse.

Expert Support

Our expert team is available to assist with the selection and installation of marine electrical system components. Feel free to reach out with any questions.

cultureSettings.RegionId: 0 cultureSettings.LanguageCode: EN